Peugeot

• Replace your weathered black door pillar vinyls with our pre preg 2x2 twill, 100% carbon fibre covers
• Suitable for the Peugeot 106 & Citroen Saxo Mk1 & 2
• Laminated construction made up of 2 x 200 gram carbon fibre plies. 
• High gloss lacquered finish
• Our products are hand finished with Meguiar's detailing products

• 5 piece, front & rear bumper moulding set for the Series 2 106 (Gti, Rallye & Quiksilver), replacing the original plastic trims
• Pre Preg 100% Carbon Fibre
• High gloss lacquered finish
• All our products are hand finished using Meguiar's detailing products
• This product can also be discounted when purchased with various other products from the 106 range, please ask for details

• Our direct replacement part, retaining the use of electric window switches, fixes into place using self tap screw
• Also included, gear gaitor surround in full carbon, rrp £32.99
• Pre Preg 100% Carbon Fibre with high gloss lacquered finish
• This product can also be discounted when purchased with other interior products from the range, please ask for further details
• This item does attract a surcharge of £10.00, refundable on receipt of a donor part from your original console
• As always, hand finished using Meguiar's detailing products

• Full pre preg carbon - 2.8kg per door (unfurnished)
• Varied range of materials, laminates, honeycomb cores and specifications available
• Currently track & race car versions available with inner door panel reduced to the basics, meaning polycarbonate windows must be used.
• Retains use of OEM hinges,  door lock, latch, handle and mirror mountings.  Supplied ready trimmed for fitting of your own door hinges.
• Supplied in either fully lacquered finished or primered ready for paint to suit your needs.
• We offer full fitting service, labour rates tba to suit the work involved with your specific project.
• Please call to discuss different versions of our doors that are available and prices to suit.
• Vehicle must use a full CDS or T45 roll cage produced by a recognised manufacturer/fabriation company

• 2x2 twill Prepreg carbon fibre
• 100% Carbon Fibre
• Handmade in the UK
• Direct replacement part
• High Gloss lacquered finish
• Hand finished with Meguiar's detailing products
• Worldwide Delivery

• To suit all Series 2 106 models
• Package includes:

• Door Pillar Trims
• Door handle cover
• Access Covers
• Fuel Cap cover

• Products made from 2x2 twill pre preg carbon fibre, 2 x plies of 200gram, finished in high gloss UV stable lacquer.  Pillar trims supplied with strong adhesive tape.  Covers require bonding into position
• Save over £30 when buying this package instead of individually

• Flat panel templated to sit within the standard front door recess
• Trim detail to suit all 3 door 106 models including vehicles with electric mirror switch and/or manual windows
• 100% pre preg carbon fibre, 2x2 twill, approximately 0.5mm thick
• Our flat panel products are lamianted and cured from defect free toughened glass, giving a flawless, glossy finish with no need to lacquer as the panel is protected from the elements inside the car
• Also available as part of our 'Trackday Interior Panel Set'

• Designed to cover (or even mount speaker into) the OEM hole left in the internal door panel when speaker and dllr bin/pocket is removed, typically in fast road, track and race applications
• 660g Twill pre preg carbon fibre, polished to high gloss finish.
• Ideally screwed or double sided taped into position
• Sold as a pair or individually
• We are more than happy to accomodate your requirements, if we do not list a blanking panel to suit your needs, please contact us to discuss, normally we will template and transfer to production upon request with no minimal order required.
• This product can also be added/exchanged for panels included in our 'Trackday' interior trim panel set
• Worldwide Delivery
• Available from stock for immediate despatch

• We will not be beaten on price for this product
• 100% pre preg carbon fibre in 2x2 twill
• High gloss lacquered finish (will not go dull or fade)
• Bonds or double sided taped into position
• Retains full use of original fuel cap and lock
• To suit Series 2 models only
• Worldwide delivery

• Genuine carbon fibre surround
• Pre preg 2x2 twill, autoclave cured
• High gloss lacquered finish
• Screws into position not included)
• Suitable for use with standard leather gaitor
• This product supplied FREE with our centre console package

• Weight saving replacement for OEM glovebox assembly
• Fix in place with self tap screws or velcro
• Autoclave cured 2x2 twill pre preg carbon fibre
• High gloss finish
• Suited to the stripped out fast road, track or race 106
• Also available as part of our 'Trackday Panel Set'

• To suit Series 2 106 bodyshell
• Full kit includes; bumpers, wings, rear quarters, side skirts in GRP
• Wide range of scomposite specification available, made to suit your requirements
• Carbon fibre reinforcements can be laminated, to suit your requirements
• Fitting service also available
• Panels available to purchase seperately, see seperate product listings in our shop

Full pre preg carbon fibre

• UV stable high gloss lacquered finish
• Direct replacement for oem part
• Genuine Peugeot badge included
• 'Package Prices' available when purchased with other products from our engine bay range

• 2x2 twill pre preg carbon fibre
• Autoclave cured
• High gloss lacquered finish
• Uses 2 x OEM fixing points
• Ultra lightweight version weighs in at 600gram (please state which specification with your order, cost unaffected)
• Contact us to discuss package price when purchasing this product with a tailgate

• To suit 16 valve engine in the Vts & Gti
• 2x2 twill pre preg carbon
• High gloss lacquered finish
• Requires bonding/velcroing into position
• Also available as part of 5 piece engine bay set

• To suit all 106 models
• 100% pre preg carbon fibre panel that sits over your original plastic backing
• Pre drilled and slotted to enable continued use of all your heater controls
• Blanks can also be supplied upon request to suit vehicles no longer using a heater
• Flawless, glossy finish
• Also available with our full track day panel sets

Direct replacement for plastic trim piece, retaining the four factory fixing points.

High gloss lacquered finish, 2x2 twill pre preg carbon fibre

Can also be supplied as a 'blank' allowing mounting of aftermarket display systems.  Please advise at time of ordering

Worldwide delivery

• For fast road, track and race cars using after market instrumentation
• Suits all 106 models (series 1 & 2)
• Templated to suit Stack Dash instrumentation or to suit your specific requirements
• Made from a x 660gram ply of pre preg carbon fibre
• Glossy finish
• We can template & trim any flat panels to suit your needs, just ask and we will gladly quote you
• Instrumentation shown in picture not included

• Extreme weight savings, whilst retaining a tidy look for the interior of your fast road, track or race car
• 2 x front panels with trim detail to suit OEM 106 door handles
• 2 x rear door cards
• 2 x fuel pump covers (138mm diameter)
• 1 x glovebox blanking panel
• 1 x Stereo blank panel
• 4 x lower/upper rear quarter panel blanks
• 1 x Bootlid trim - NEW
• 2x2 twill, hand laminated (.5mm thick) pre preg carbon fibre, autoclave cured
• Supplied in high gloss finish
• Additional flat panel trim pieces always available to suit your requirements, please just ask

• Direct replacement for oem plastic trim
• suitable for manual mirror assembies only
• Full pre preg carbon
• High gloss UV stable lacquered finish
• Package price available when purchasing with Mirror Caps

• Discounted package price - Saving £31.99 over RRP
• Pair of 2x2 twill & 100% pre preg carbon fibre caps
• Pair of direct replacement base plates
• High gloss lacquered finish
• Genuine fit
• Mirrors not included

• Front bumper (Rallye) inserts for the Peugeot Series 2 106 (Gti, Rallye & Quiksilver).  Replaces original part (Rallye) or driving lights as fitted to gti & Quiksilver models.  Also suitable for attaching flexible ducting to front brakes to aid cooling etc.
• Pre Preg 100% Carbon Fibre
• High gloss lacquered finish (unlike the competition) OFFERING A DURABLE FINISH AND WILL NOT GO DULL OR LOSE SHINE OVER TIME, UNLIKE UNPROTECTED PRE PREG PRODUCED COMPONENTS
• Our genuine carbon fibre inserts are only £9.99 more than genuine Peugeot plastic parts which retail at over £50.00 and supplied in dull primer, requiring painting.
• This product can also be discounted when purchased with various other products from the 106 range, please ask for details.  A very popular product, offering a great aesthetic enhancement to your Series 2 106.
• Our parts are produced and sold by the manufacturer - Streamline Carbon, accept nothing less ...

• Popular upgrade to replace tired bumper lights on the Series 2 106
• Great for fast road & track/event cars
• No need to paint
• High gloss, polished finish
• Bonded into position

• Pair of flat panels templated to replace the black plasitc grilles situated in the boot compartment behind rear lights
• To suit all 3 door 106 models
• 100% pre preg carbon fibre, 660g construction, 2x2 twill, approximately 0.5mm thick once cured
• Our flat panel products are lamianted and cured from defect free toughened glass, giving a flawless, glossy finish with no need to lacquer as the panel is protected from the elements inside the car
• Also available as part of our 'Trackday Interior Panel Set'

• Flat panel templated to sit within the standard rear quarter recess
• To suit all 3 door 106 models
• 100% pre preg carbon fibre, 2x2 twill, approximately 0.5mm thick
• Our flat panel products are lamianted and cured from defect free toughened glass, giving a flawless, glossy finish with no need to lacquer as the panel is protected from the elements inside the car
• Also available as part of our 'Trackday Interior Panel Set'

• Originally designed for our own 106 project, we are pleased to be able to bring this newly templated interior panel to our retail range
• Completely and neatly covers all main visible holes along the rear quarter of the 106
• 100% pre preg carbon, autoclave cured, 0.5mm thick
• Flawless & glossy finish
• Secured by screws, included (or velcro)
• Pair of panels supplied
• Also available to purchase with our other interior panels as a package

• Pair of flat panels templated to sit within the standard rear quarter recess covering hole where seat belt locates
• To suit all 3 door 106 models
• 100% pre preg carbon fibre, 660g construction, 2x2 twill, approximately 0.5mm thick once cured
• Our flat panel products are lamianted and cured from defect free toughened glass, giving a flawless, glossy finish with no need to lacquer as the panel is protected from the elements inside the car
• Also available as part of our 'Trackday Interior Panel Set'

• Pair of 2x2 twill & 100% pre preg replacement carbon fibre caps
• All pre fitted to mirrors prior to despatch ensuring a genuine fuss free fit
• High gloss lacquered finish
• Mirrors not included

• 100% pre preg carbon fibre, 2x2 twill, 1 pair
• High gloss lacquered finish
• Suitable for all Series 2 model 3 door 106s
• Bonded or double sided taped into place
• Door handle covers also available

• 100% pre preg carbon fibre, 2x2 twill, 2 pairs
• High gloss lacquered finish
• Suitable for all Series 2 model 106s
• Bonded or double sided taped into place
• Also available to purchase seperately