Online Shop

• To suit 16 valve engine in the Vts & Gti
• 2x2 twill pre preg carbon
• High gloss lacquered finish
• Requires bonding/velcroing into position
• Also available as part of 5 piece engine bay set

• To suit all 106 models
• 100% pre preg carbon fibre panel that sits over your original plastic backing
• Pre drilled and slotted to enable continued use of all your heater controls
• Blanks can also be supplied upon request to suit vehicles no longer using a heater
• Flawless, glossy finish
• Also available with our full track day panel sets

Direct replacement for plastic trim piece, retaining the four factory fixing points.

High gloss lacquered finish, 2x2 twill pre preg carbon fibre

Can also be supplied as a 'blank' allowing mounting of aftermarket display systems.  Please advise at time of ordering

Worldwide delivery

• For fast road, track and race cars using after market instrumentation
• Suits all 106 models (series 1 & 2)
• Templated to suit Stack Dash instrumentation or to suit your specific requirements
• Made from a x 660gram ply of pre preg carbon fibre
• Glossy finish
• We can template & trim any flat panels to suit your needs, just ask and we will gladly quote you
• Instrumentation shown in picture not included

• Extreme weight savings, whilst retaining a tidy look for the interior of your fast road, track or race car
• 2 x front panels with trim detail to suit OEM 106 door handles
• 2 x rear door cards
• 2 x fuel pump covers (138mm diameter)
• 1 x glovebox blanking panel
• 1 x Stereo blank panel
• 4 x lower/upper rear quarter panel blanks
• 1 x Bootlid trim - NEW
• 2x2 twill, hand laminated (.5mm thick) pre preg carbon fibre, autoclave cured
• Supplied in high gloss finish
• Additional flat panel trim pieces always available to suit your requirements, please just ask

• Direct replacement for oem plastic trim
• suitable for manual mirror assembies only
• Full pre preg carbon
• High gloss UV stable lacquered finish
• Package price available when purchasing with Mirror Caps

• Discounted package price - Saving £31.99 over RRP
• Pair of 2x2 twill & 100% pre preg carbon fibre caps
• Pair of direct replacement base plates
• High gloss lacquered finish
• Genuine fit
• Mirrors not included

• Front bumper (Rallye) inserts for the Peugeot Series 2 106 (Gti, Rallye & Quiksilver).  Replaces original part (Rallye) or driving lights as fitted to gti & Quiksilver models.  Also suitable for attaching flexible ducting to front brakes to aid cooling etc.
• Pre Preg 100% Carbon Fibre
• High gloss lacquered finish (unlike the competition) OFFERING A DURABLE FINISH AND WILL NOT GO DULL OR LOSE SHINE OVER TIME, UNLIKE UNPROTECTED PRE PREG PRODUCED COMPONENTS
• Our genuine carbon fibre inserts are only £9.99 more than genuine Peugeot plastic parts which retail at over £50.00 and supplied in dull primer, requiring painting.
• This product can also be discounted when purchased with various other products from the 106 range, please ask for details.  A very popular product, offering a great aesthetic enhancement to your Series 2 106.
• Our parts are produced and sold by the manufacturer - Streamline Carbon, accept nothing less ...

• Popular upgrade to replace tired bumper lights on the Series 2 106
• Great for fast road & track/event cars
• No need to paint
• High gloss, polished finish
• Bonded into position

• Pair of flat panels templated to replace the black plasitc grilles situated in the boot compartment behind rear lights
• To suit all 3 door 106 models
• 100% pre preg carbon fibre, 660g construction, 2x2 twill, approximately 0.5mm thick once cured
• Our flat panel products are lamianted and cured from defect free toughened glass, giving a flawless, glossy finish with no need to lacquer as the panel is protected from the elements inside the car
• Also available as part of our 'Trackday Interior Panel Set'

• Flat panel templated to sit within the standard rear quarter recess
• To suit all 3 door 106 models
• 100% pre preg carbon fibre, 2x2 twill, approximately 0.5mm thick
• Our flat panel products are lamianted and cured from defect free toughened glass, giving a flawless, glossy finish with no need to lacquer as the panel is protected from the elements inside the car
• Also available as part of our 'Trackday Interior Panel Set'

• Originally designed for our own 106 project, we are pleased to be able to bring this newly templated interior panel to our retail range
• Completely and neatly covers all main visible holes along the rear quarter of the 106
• 100% pre preg carbon, autoclave cured, 0.5mm thick
• Flawless & glossy finish
• Secured by screws, included (or velcro)
• Pair of panels supplied
• Also available to purchase with our other interior panels as a package

• Pair of flat panels templated to sit within the standard rear quarter recess covering hole where seat belt locates
• To suit all 3 door 106 models
• 100% pre preg carbon fibre, 660g construction, 2x2 twill, approximately 0.5mm thick once cured
• Our flat panel products are lamianted and cured from defect free toughened glass, giving a flawless, glossy finish with no need to lacquer as the panel is protected from the elements inside the car
• Also available as part of our 'Trackday Interior Panel Set'

• Pair of 2x2 twill & 100% pre preg replacement carbon fibre caps
• All pre fitted to mirrors prior to despatch ensuring a genuine fuss free fit
• High gloss lacquered finish
• Mirrors not included

• 100% pre preg carbon fibre, 2x2 twill, 1 pair
• High gloss lacquered finish
• Suitable for all Series 2 model 3 door 106s
• Bonded or double sided taped into place
• Door handle covers also available

• 100% pre preg carbon fibre, 2x2 twill, 2 pairs
• High gloss lacquered finish
• Suitable for all Series 2 model 106s
• Bonded or double sided taped into place
• Also available to purchase seperately

• 100% pre preg carbon fibre, 2x2 twill, 1 pair
• High gloss lacquered finish
• Suitable for all Series 2 model 106s
• Bonded or double sided taped into place
• Door access covers also available

Full pre preg carbon fibre supplied ready for colour paint or supplied in lacquered finish with 2x2 twill weave on show.

Debadged recess & debarred front mouth version.

Not to be confused with wet lay/grp versions, this is the ultimate!

Weight - 2.0kg

Full wide arch kit also available in full carbon fibre

Full pre preg carbon fibre front bumper weighing in at under 2kg.  Supoplied with debarred mouth and debadged top area.  Available in both 2x2 twill or 4x4 twill (pictured).  Splitter is made as part of bumper.

Can be supplied ready for paint or in lacquered finish, please contact us to discuss your requirements and options available.

This product does not come with fittings (as customers vehicles do vary), we can however price these seperately for you and do also offer a full fitting service and bodyshop facilities.

Rear bumper also available to purchase seperately or as a pair.  Please see seperate product listing.

Worldwide delivery available

• As used on our own 106 project
• To suit all series 2 vehicles
• Includes splitter moulded as one, no recess for bonnet badge and 'debarred' front mouth
• GRP construction

• Supplied in gelcoat finish ready for primer
• Fast turnaround for competition cars
• Suitable for road and track applications
• Full Maxi wide arch kit also available
• Also available in pre preg autoclave cured carbon fibre, with lacquered finish or ready to paint

• As used on our own 106 project
• To suit all series 2 vehicles
• GRP/Carbon Fibre construction
• Fixing points
• Supplied in gelcoat finish ready for primer
• Fast turnaround for competition cars
• Suitable for road and track applications
• Full Maxi wide arch kit also available

• As used on our own 106 project
• To suit all series 2 vehicles
• Unlike alternative kits on the market our rear quarter panels can either be fixed over the OEM rear quarter or can completely replace the panel (see picture)
• GRP construction
• Fixing points
• Supplied in gelcoat finish ready for primer
• Fast turnaround for competition cars
• Suitable for road and track applications
• Full Maxi wide arch kit also available

• As used on our own 106 project
• To suit all series 2 vehicles
• GRP/Carbon Fibre construction
• Fixing points
• Supplied in gelcoat finish ready for primer
• Fast turnaround for competition cars
• Suitable for road and track applications
• Full Maxi wide arch kit also available

• As used on our own 106 project
• To suit all series 2 vehicles
• Unlike alternative kits on the market our rear quarter panels can either be fixed over the OEM rear quarter or can completely replace the panel (see picture)
• Please note - This panel does not retain the OEM filler neck position, this has been deleted enabling bespoke filler neck position to suit customer requirements (typically through rear quart window or via tailgate direct into fuel cell
• GRP construction
• Supplied in gelcoat finish ready for primer
• Fast turnaround for competition cars
• Suitable for road and track applications
• Full Maxi wide arch kit also available

• As used on our own 106 project
• To suit all series 2 vehicles
• GRP construction
• Supplied in gelcoat finish ready for primer
• Fast turnaround for competition cars
• Suitable for road and track applications
• Full Maxi wide arch kit also available
• Also available in pre preg autoclave cured carbon fibre, with lacquered finish or ready to paint

• Newly templated to suit the series 2 106 and a replacement for the factory plastic trim
• Most suited to those with stripped interiors for fast road and track cars
• Also available as part of our trackday package sets
• High gloss, pre preg resin finish 2x2 twill, 0.5mm thick
• Worldwide delivery

Full pre preg carbon fibre supplied ready for colour paint or supplied in lacquered finish with 2x2 twill weave on show.

Not to be confused with wet lay/grp versions, this is the ultimate!

Weight - 1.5kg

Full wide arch kit also available in full carbon fibre

Pair of rear quarter panels, produced using pre preg carbon fibre (and kevlar, for impact resistance), suitable only for wide tracked vehicles.  Can be used/fitted with original steel panel in place or partially removed.  Extreme weight savings over grp versions available on the market, and above all, strength, especially for race environments.

Available as part of our full kit or individually.

Panel will require painting once fitted.

Worldwide delivery (please contact/email for accurate delvery outside of UK, website listing is only estimate)

Designed for use in track and race orientated vehicles, using aftermarket instrumentation along with a distinct lack of 'luxuries'. Dashboard is secured into place using 3 main fixing points through scuttle/bulkhead and retaining these plastic fixings from your original dashboard (not supplied and will require some cutting to locate oem  part into place) carbon fibre component is secured with 3 subtle rivets on to surface.

Includes seperate instrument surround/mounting section left blank to suit all aftermarket displays.

1.3kg in weight

Can be supplied in either lacquered and/or flocked finish, please advise at time of ordering, part flock/lacquer also available

• As used on our own 106 project
• To suit all series 2 vehicles
• Sold as a pair, also available individually
• GRP construction

• Supplied in gelcoat finish ready for primer
• Fast turnaround for competition cars
• Suitable for road and track applications
• Full Maxi wide arch kit also available
• Also available in full pre preg carbon fibre, autoclave cured, finished in high gloss lacquer