Interior Trim

• Designed to cover (or even mount speaker into) the OEM hole left in the internal door panel when speaker and dllr bin/pocket is removed, typically in fast road, track and race applications
• 660g Twill pre preg carbon fibre, polished to high gloss finish.
• Ideally screwed or double sided taped into position
• Sold as a pair or individually
• We are more than happy to accomodate your requirements, if we do not list a blanking panel to suit your needs, please contact us to discuss, normally we will template and transfer to production upon request with no minimal order required.
• This product can also be added/exchanged for panels included in our 'Trackday' interior trim panel set
• Worldwide Delivery
• Available from stock for immediate despatch

• Genuine carbon fibre surround
• Pre preg 2x2 twill, autoclave cured
• High gloss lacquered finish
• Screws into position not included)
• Suitable for use with standard leather gaitor
• This product supplied FREE with our centre console package

• Weight saving replacement for OEM glovebox assembly
• Fix in place with self tap screws or velcro
• Autoclave cured 2x2 twill pre preg carbon fibre
• High gloss finish
• Suited to the stripped out fast road, track or race 106
• Also available as part of our 'Trackday Panel Set'

• To suit all 106 models
• 100% pre preg carbon fibre panel that sits over your original plastic backing
• Pre drilled and slotted to enable continued use of all your heater controls
• Blanks can also be supplied upon request to suit vehicles no longer using a heater
• Flawless, glossy finish
• Also available with our full track day panel sets

Direct replacement for plastic trim piece, retaining the four factory fixing points.

High gloss lacquered finish, 2x2 twill pre preg carbon fibre

Can also be supplied as a 'blank' allowing mounting of aftermarket display systems.  Please advise at time of ordering

Worldwide delivery

• For fast road, track and race cars using after market instrumentation
• Suits all 106 models (series 1 & 2)
• Templated to suit Stack Dash instrumentation or to suit your specific requirements
• Made from a x 660gram ply of pre preg carbon fibre
• Glossy finish
• We can template & trim any flat panels to suit your needs, just ask and we will gladly quote you
• Instrumentation shown in picture not included

• Extreme weight savings, whilst retaining a tidy look for the interior of your fast road, track or race car
• 2 x front panels with trim detail to suit OEM 106 door handles
• 2 x rear door cards
• 2 x fuel pump covers (138mm diameter)
• 1 x glovebox blanking panel
• 1 x Stereo blank panel
• 4 x lower/upper rear quarter panel blanks
• 1 x Bootlid trim - NEW
• 2x2 twill, hand laminated (.5mm thick) pre preg carbon fibre, autoclave cured
• Supplied in high gloss finish
• Additional flat panel trim pieces always available to suit your requirements, please just ask

• Pair of flat panels templated to replace the black plasitc grilles situated in the boot compartment behind rear lights
• To suit all 3 door 106 models
• 100% pre preg carbon fibre, 660g construction, 2x2 twill, approximately 0.5mm thick once cured
• Our flat panel products are lamianted and cured from defect free toughened glass, giving a flawless, glossy finish with no need to lacquer as the panel is protected from the elements inside the car
• Also available as part of our 'Trackday Interior Panel Set'

• Flat panel templated to sit within the standard rear quarter recess
• To suit all 3 door 106 models
• 100% pre preg carbon fibre, 2x2 twill, approximately 0.5mm thick
• Our flat panel products are lamianted and cured from defect free toughened glass, giving a flawless, glossy finish with no need to lacquer as the panel is protected from the elements inside the car
• Also available as part of our 'Trackday Interior Panel Set'

• Originally designed for our own 106 project, we are pleased to be able to bring this newly templated interior panel to our retail range
• Completely and neatly covers all main visible holes along the rear quarter of the 106
• 100% pre preg carbon, autoclave cured, 0.5mm thick
• Flawless & glossy finish
• Secured by screws, included (or velcro)
• Pair of panels supplied
• Also available to purchase with our other interior panels as a package

• Pair of flat panels templated to sit within the standard rear quarter recess covering hole where seat belt locates
• To suit all 3 door 106 models
• 100% pre preg carbon fibre, 660g construction, 2x2 twill, approximately 0.5mm thick once cured
• Our flat panel products are lamianted and cured from defect free toughened glass, giving a flawless, glossy finish with no need to lacquer as the panel is protected from the elements inside the car
• Also available as part of our 'Trackday Interior Panel Set'

• Newly templated to suit the series 2 106 and a replacement for the factory plastic trim
• Most suited to those with stripped interiors for fast road and track cars
• Also available as part of our trackday package sets
• High gloss, pre preg resin finish 2x2 twill, 0.5mm thick
• Worldwide delivery

Designed for use in track and race orientated vehicles, using aftermarket instrumentation along with a distinct lack of 'luxuries'. Dashboard is secured into place using 3 main fixing points through scuttle/bulkhead and retaining these plastic fixings from your original dashboard (not supplied and will require some cutting to locate oem  part into place) carbon fibre component is secured with 3 subtle rivets on to surface.

Includes seperate instrument surround/mounting section left blank to suit all aftermarket displays.

1.3kg in weight

Can be supplied in either lacquered and/or flocked finish, please advise at time of ordering, part flock/lacquer also available

• Blanking panel to cover recess in dashboard when stereo has been removed in fast road and track cars
• Suitable for all 106 models
• High gloss, 2x2 twill, autoclave cured
• Thickness of 0.5mm
• Fixed in place by screws
• This product is also included in our 'Trackday Panel Set' package

• 100% pre preg carbon fibre, 2x2 twill autoclave cured
• High Gloss finish
• 138mm diameter flat panels to replace plastic oem trims
• We can also supply any flat panels to suit your requirements, please supply dimensions or card template as required, Prices on application

• Extreme weight savings, whilst retaining a tidy look for the interior of your fast road, track or race car
• 2 x full size front panels with trim detail to suit OEM 205 door handles
• 2 x rear door cards
• 2 x fuel pump covers
• 4 x lower/upper rear quarter panel blanks
• Hand laminated 660gram (.5mm thick) pre preg carbon fibre, autoclave cured
• Supplied in high gloss resin finish
• Additional flat panel trim pieces always available to suit your requirements, please just ask

• Extreme weight savings, whilst retaining a tidy look for the interior of your fast road, track or race car
• 2 x Full size front panels with trim detail to suit OEM door handles
• 2 x Rear door cards
• 1 x fuel pump cover (190mm diameter)
• 2x2 twill, hand laminated (.5mm thick) pre preg carbon fibre, autoclave cured
• Supplied in high gloss resin finish
• Additional flat panel trim pieces always avilable to suit your requirements, please just ask

• Designed to cover (or even mount speaker into) the OEM hole left in the internal door panel when speaker and door bin/pocket is removed, typically in fast road, track and race applications
• 660g Twill pre preg carbon fibre, polished to high gloss finish.
• Ideally screwed or double sided taped into position
• Sold as a pair or individually
• We are more than happy to accomodate your requirements, if we do not list a blanking panel to suit your needs, please contact us to discuss, normally we will template and transfer to production upon request with no minimal order required.
• This product can also be added/exchanged for panels included in our 'Trackday' interior trim panel set
• Worldwide Delivery
• Available from stock for immediate despatch

• Pre preg carbon fibre
• High gloss lacquered finish
• Locates into position over standard lid
• Retains standard use of glovebox lid

• Cover incorporating 3 x 52 to 60mm gauge pods (Please advise at time of ordering)
• Autoclave cured 2x2 twill pre preg carbon fibre
• Lacquered finish
• Both RHD & LHD versions available
• Made in the UK
• Worldwide Delivery

• Cover incorporating 3 x 52 to 60mm gauge pods (please adivse at time of ordering)
• Autoclave cured 2x2 twill pre preg carbon fibre
• Lacquered finish
• Both RHD & LHD versions available
• Made in the UK
• Worldwide Delivery

Designed to fulfil the needs of our customers opting for the more stripped out interiors, fast road and track use and those customers using our trackday interior panel sets.

2x2 twill pre preg carbon fibre, high gloss lacqured finish, inside face also smooth and can be supplied flocked for that factory feel (additional £10.00)

Supplied blank or drilled to suit your requirements,please advise at time of ordering

Worldwide delivery